EN
COPYRIGHT
No part of this manual may be reproduced or
transmitted without the written authorization of
Elite S.r.l.
The Elite RealPower software and relative code
are property of Elite S.r.l.
International copyright law protects the software.
The Elite RealPower software must be treated
like any other copyrighted material, such as bo-
oks.
Users undertake not to modify or adapt the pro-
gramme. Users also undertake not to decompile,
disassemble
or attempt in any way to discover the native sof-
tware code.
Your RealPower electronic trainer is made of the following components:
REALPOWER UNIT STAND
ELECTRONIC RESISTANCE UNIT
CONSOLE FOR HANDLEBAR
USB KEY
"RITMO" FEET
TRADITIONAL FEET
ALLEN KEY
CADENCE SENSOR
MAGNET
SMALL FIXING BANDS
CONSOLE ADAPTER FOR handlebar stem 1 Ref. K
8-CORE CABLE
24
Minimum System Requirements:
Processor:
Pentium 3
Operative System:
Windows XP / Vista / 7
Hard disk:
10 Gb 7200 rpm
Ram:
256 Mb
Monitor:
1024x768
Drive:
DVD-ROM
Ports:
I/O USB
NAME AND LIST OF COMPONENTS
1 Ref. A
1 Ref. B
1 Ref. C
1 Ref. D
4 Ref. E
4
Ref. F
1 Ref. G
1 Ref. H
1 Ref. I
10 Ref. J
1 Ref. L
IMPORTANT POINTS
If placed near TV's, radios and motors, the equip-
ment generates strong magnetic waves and inter-
ference that may give rise to incorrect readings.
Do not use the device and the console within
a distance of about one and a half metres from
other transmitters. Do not use other wireless
equipment at the same time. This may give rise to
incorrect measurements. Do not expose the unit
and the console to direct sunlight for long periods
when they are not in use. Check the position and
assembly conditions of the frequency sensor and
magnet at regular intervals.
Never use chemical detergents (benzene or thin-
ners) on any part of the Elite RealPower.
DVD-ROM
CD-ROM
INSTRUCTION MANUAL
SCREW M6 X 16
SCREWS Ø 2,9 mm
WASHERS Ø 6
TRAVEL BLOCK
QUICK RELEASE
POWER ADAPTER
SUPPORT PLATE
ADJUSTING PLATE
2 Ref. M
1 Ref. N
1 Ref. O
3 Ref. P
2 Ref. Q
2 Ref. R
1 Ref. S
1 Ref. T
1 Ref. U
1 Ref. V
1 Ref.X