Publicité
Janome Instruction Manual
q
w
q
w
q
w
www.toews.com
e
e
e
q
w
e
Tricot Stitch
q Stitch pattern:
w Needle thread tension:
e Presser foot:
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker. The
stitch is also excellent for darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the
stitches.
Overedge Stitch
q Stitch pattern:
w Thread tension dial:
e Presser foot:
This stitch pattern combines the straight and the zigzag
stitches, using the overedge foot, to stitch and overcast
seams in one step.
It is ideal for 1/4˝ (0.6 cm) seams on knits (when
attaching ribbing) or on medium to heavyweight woven
fabrics where you want a narrow seam.
Place your fabric so that the raw edges fit under the wire
guides and touch the black ridge.
NOTE:
Stitch width should be set between 5.0 to 7.0.
The blue tip needle is recommended for stretch
materials.
Serging Stitch
q Stitch pattern:
w Thread tension dial:
e Presser foot:
This stitch finishes the edge of fabric similar to a
commercial overlocking machine for professional look.
Place the fabric edge next to the guide of the foot and
then sew.
q Pin
w Guide
e Edge of the fabric
44
Janome Sewing Machine
A
Zigzag foot: A
A
Overedge foot: C
5-8
Overcast foot: M
TB30 Owners Manual/ User Guide
Publicité
