Publicité
Janome Instruction Manual
q
w
y
e
r
q
w
e
www.toews.com
Controlling Sewing Speed
Sewing speed is varied by the foot control.
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully de-
pressed.
Operating Instructions:
Foot controller Model 21317 is for use with this sewing
machine.
Speed Control Slider
Sewing speed can be varied by the speed control Slider
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
Machine Operating Buttons
t
u
i
q q q q q Up/down needle position button
Press this button to set the needle position up or down
when the machine stops. The machine will stop with the
needle up or down depending on the needle position
determined by this button.
• The button is lit orange when needle position is set
down position.
w w w w w Auto-lock button
When stitches
immediately sew locking stitches when the Auto-lock
button is pressed, then automatically stop. When sewing
other stitches (except
sew locking stitches at the end of the pattern being sewn
and automatically stop.
• The button is lit green until locking stitch is automatically
stopped.
e e e e e Reverse stitch button
When stitches
sew in reverse while the reverse stitch button is pressed.
If you press the reverse stitch button when sewing other
stitches (except
immediately sew locking stitches and automatically stop.
If you press the reverse button when stitch pattern
has been selected and the foot control is not connected,
the machine will start sewing in reverse as long as the
button is pressed and the machine will stop when the
button is released.
• The button is lit red until locking stitch is automatically
stopped.
10
Janome Sewing Machine
are selected, the machine will
), the machine will
are selected, the machine will
), the machine will
TB30 Owners Manual/ User Guide
Publicité
