Zenner zelsius C5-ISF Notice D'installation Et D'utilisation page 54

INTRODUCTION
The model GE552Y215-6-7 is a compact heat meter that measures the thermal energy used in the
heating and cooling systems.
The meter allows to measure the thermal energy passing into a hydraulic circuit used for heating and\or
for cooling, it let also the acquisition of the volume measured by up to 2 water meters equipped with
pulse emitter.
The meter is equipped with a pulse emitter output for the heating data transmission and with a Wired
M-Bus network port.
PACKAGE CONTENTS
•
GE552Y215-6-7 heat meter
•
User manual
•
Adhesive seal
•
Declaration of conformity
GENERAL INFORMATION
Before proceeding with the installation and configuration of the product, read carefully the instructions
described in this manual. For further technical questions, please contact the Technical Support.
The installation must be carried out by qualified personnel only.
The relevant regulations regarding the instrument are the EN1434 (1-6) and Directive 2014/32/CE (Annex
MI-004).
Any tampering of the meter or removal of the seals will void the warranty provided.
For proper energy accounting, always respect the mounting type prescribed (inlet pipe mounting /
return pipe mounting). Always refer to the indications reported on the lid of the meter.
GE552Y215-6-7 User Manual v1.9.1
ENG - 2