Perpetual Calendar; Elapsed Time Ring - Timex Metropolitan Mode D'emploi

EASY SET ALARM
HOUR MARKER
ALARM SET
TURNING RING
EASY SET ALARM WITH DATE & INDIGLO
1) From the "A" position, PUSH the TIMEKEEPING CROWN in (towards
the watch case) to activate the INDIGLO
watch dial.
EASY SET ALARM DATE & TIME SETTINGS
TO SET THE DATE:
1) With the TIMEKEEPING CROWN in the "B" position TURN the
TIMEKEEPING CROWN or TURNING RING in either direction to set the
date.
TO SET THE TIME:
1) With the TIMEKEEPING CROWN in the "C" position TURN the
TIMEKEEPING CROWN or TURNING RING in either direction to set the
time.
EASY SET ALARM SETTINGS
1) Your easy set alarm watch is equipped with two types of alarms:
2) 12-Hour Alarm: rings OR vibrates twice per day at the desired hour and
minute as long as the alarm is activated. (Alarm crown must be in "E"
position.)
3) Hourly Alarm: rings OR vibrates every hour at the desired minute if acti-
vated. (Alarm crown must be in "F" position.)
TO SET THE 12-HOUR ALARM:
1) With the ALARM CROWN in the "D" position, TURN the ALARM CROWN
or TURNING RING in either direction to set the hour and minute alarm
markers. To activate the alarm to ring or vibrate at the desired time, PULL
the ALARM CROWN out to the "E" position. A single beep sound and
flash, OR a vibration will indicate that the 12-Hour Alarm is activated.
2) The alarm will sound and the dial will flash OR vibrate at the desired time
(hour and minute) and will repeat every twelve hours unless the alarm is
deactivated.
NOTE: Alarm is deactivated when the ALARM CROWN is in the "D" position.
If the alarm is not deactivated it will automatically stop ringing after 20 beeps
and flashes OR stop vibrating, and will resume in 12 hours at the indicated
time.
TO SET THE HOURLY ALARM:
1) With the ALARM CROWN in the "D" position, TURN the ALARM CROWN
or TURNING RING in either direction to set the minute alarm marker.
2) To activate the alarm to ring or vibrate at the desired minute, PULL the
ALARM CROWN out to the "F" position. Three beeps sound and flash OR
a vibration indicates the Hourly Alarm is activated.
3) The alarm will sound and the dial will flash OR vibrate at the desired min-
ute and will repeat every hour on the specified minute unless the alarm is
deactivated.
NOTE: Alarm is deactivated when the ALARM CROWN is in the "D" position.
If the alarm is not deactivated it will automatically stop ringing after 20 beeps
and flashes OR stop vibrating, and will resume again in one hour at the indi-
cated minute.
MINUTE MARKER
TIMEKEEPING/INDIGLO ® NIGHT-LIGHT
CROWN. PUSH CROWN TO ACTIVATE
THE INDIGLO ® NIGHT-LIGHT
A B C
POSITION
POSITION
ALARM CROWN
PULL CROWN "OUT" TO
ACTIVATE THE ALARM
NIGHT-LIGHT
®
Night-Light and illuminate the
®
Register your product at www.timex.com

PERPETUAL CALENDAR

Your Perpetual Calendar watch accurately keeps track of how many days
are in each month. It also adjusts for leap years. The date on your watch
(including the month and year) was preset at the factory to Eastern Standard
Time, Greenwich Mean Time or Hong Kong Standard Time (depending on
where you purchased your watch). You only need to adjust the time.
WED 14
CHECK DATE
(FACTORY USE ONLY)
TO SET TIME
To set time, simply pull crown all the way out and turn. Day and date change
automatically when time is adjusted past midnight; there is no additional step
for setting day or date. Push crown in when done.
After setting, if date changes at noon, time needs to be adjusted ahead or
back 12 hours.
If crown is accidentally put in MIDDLE position and turned, date display will
change temporarily, but date setting is unaffected. Simply pull crown all the
way out and set time. Proper date display will resume.
PERPETUAL CALENDAR WATCH FREE LIFETIME REPLACEMENT**
If the battery needs to be changed, we recommend that only TIMEX replace it.
Your watch will need to be recalibrated to correct time and date after chang-
ing the battery. To return your watch to Timex, visit the retailer where you
purchased your watch or go to
for information on contacting Timex.
** Shipping & handling charges apply.
NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF
PERSONAL VALUE IN YOUR SHIPMENT.

ELAPSED TIME RING

If your watch is equipped with a rotatable outer ring on the face, with num-
bers corresponding to minutes, you can use this Elapsed Time Ring to time
an activity from the start, or to mark the ending time for the duration of an
activity.
TO TIME AN ACTIVITY FROM THE START:
Set the Start/Stop triangle at the time (hour or minute) when you start the
activity (As shown on the left in the illustration shown below). At completion,
you can see how long the activity took.
TO MEASURE THE TIME REMAINING:
Set the triangle to the hour or minute position when you wish to complete the
activity, and check the watch periodically for progress towards that goal.
In the illustration shown on the previous page on the right you can stop when
the minute hand reaches the 20 minutes past the hour position.
2
ENGLISH 990-095926-02
MIDDLE
WED 14
SET TIME
DAY, DATE
http://www.timex.com/productWarranty.html
REVISED 2.5.2018
OUT