Recording Using The Receiver - Sony STR-DA4400ES Mode D'emploi

• If the NIGHT MODE function is turned on while
the receiver is receiving signals with a sampling
frequency of higher than 96 kHz, the signals will
always be played back at either 44.1 kHz or
48 kHz.
Tip
While this function is on, the Bass, Treble, and
Effect Levels increase, and "D. Range Comp" is
automatically set to "MAX."
Recording using the
receiver
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
Recording onto a MiniDisc or
audio tape
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
1
Press the input button of the
playback component.
2
Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
3
Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
Input
buttons
continued
97 GB