Enjoying The Tv Sound From The Speakers Connected To The Receiver (System Audio Control) - Sony STR-DA4400ES Mode D'emploi

7
Press V/v repeatedly to select "ON,"
then press .
The Control for HDMI function of the
receiver is activated.
8
Press GUI MODE to exit the GUI menu.
If the GUI menu is displayed, the Control
for HDMI function of the playback
components will not work properly.
9
Press one of the HDMI input buttons to
display the image of the playback
components for which you want to set
the Control for HDMI function.
10
Turn the Control for HDMI function of
the connected component on.
For details on setting the connected
component, refer to its operating
instructions.
11
Repeat steps 9 and 10 to set the
Control for HDMI function and to
display the image of all the playback
components you want to use.
Playing back components with
one-touch operation (One-Touch
Play)
By a simple operation (one-touch),
components connected to the receiver with
HDMI connections start automatically.
You can enjoy the sound/image using
connected components.
Play back a connected component.
The receiver and TV are turned on
simultaneously, and sound and image are
output from the receiver and TV.
Note
Depending on the TV, the start of the content may
not be output.
Enjoying the TV sound from the
speakers connected to the
receiver (System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
Depending on the TV settings, while you are
watching the TV, the receiver turns on and
switches to the "TV" function automatically.
TV sound is output from the speakers
connected to the receiver, and the volume of
the TV is minimized simultaneously.
You can use the System Audio Control
function as follows.
• The sound of the TV is output from the
speakers connected to the receiver when you
turn the receiver on while the sound is being
output from the TV speaker.
• You can adjust the receiver's volume when
you adjust the TV volume.
You can also operate this function using the
TV menu. For details, see the operating
instructions of the TV.
Notes
• When "Control for HDMI" is set to "ON," the
"Audio Out" settings in the HDMI settings menu
will set automatically depending on the System
Audio Control settings.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
Turning off the receiver with the
TV (System Power Off)
When you turn the TV off by using the power
button on the TV's remote, the receiver and
the connected components turn off
automatically.
You can also use the receiver's remote to turn
off the TV.
continued
91 GB