Sony STR-DA4400ES Mode D'emploi page 10

Name Function
B Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
L Front Left
R Front Right
C Center (monaural)
SL Surround Left
SR Surround Right
S Surround (monaural or the
surround components
obtained by Pro Logic
processing)
SBL Surround Back Left
SBR Surround Back Right
SB Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: Surround
speakers are set to "NO."
Sound Field: A.F.D. AUTO
SW
10
GB
L C R
SL SR
Name Function
C Input
Light up to indicate the
indicators current input.
INPUT Lights up constantly with
either following the
corresponding indicators
that indicate the current
input status.
HDMI The receiver recognizes a
component connected via
an HDMI IN jacks.
DMPORT The DIGITAL MEDIA
PORT adapter is connected
and "DMPORT" is
selected.
MULTI IN The multi-channel input is
selected.
AUTO Lights up with the
corresponding indicators
that indicate the current
input when INPUT MODE
is set to "Auto."
COAX Digital signal is input
through the COAXIAL
jack.
OPT Digital signal is input
through the OPTICAL jack.
ANALOG No digital signal is being
input. When INPUT
MODE is set to "Analog,"
or when the "2ch Analog
Direct" is being selected, it
also lights up.
D EQ
Lights up when the
equalizer is activated.
E D.C.A.C.
Lights up when auto
calibration is activated.
F ZONE 2/
Lights up while operation in
ZONE 3 zone 2/zone 3 is being
enabled.
G SLEEP
Lights up when the sleep
timer is activated.