Sony STR-DA4400ES Mode D'emploi page 43

3
Press V/v repeatedly to select
" Settings," then press
b.
The Settings menu list appears on the TV
screen.
4
Press V/v repeatedly to select
"Speaker," then press
5
Press V/v repeatedly to select
"Impedance," then press
6
Press V/v repeatedly to select
"4 Ω" or "8 Ω" depending on
the speakers you are using,
then press
The parameter you have selected is
entered.
or
or b.
.
.
To exit the menu
Press MENU.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
impedance of 8 ohms or higher, set "Impedance" to
"8 Ω." When connecting other types of speakers,
set it to "4 Ω."
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both "A" and "B"
configuration:
Set "Impedance" to "8 Ω" in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set "Impedance" to "4 Ω" in the Speaker
settings menu.
43 GB