Sony STR-DA4400ES Mode D'emploi page 121

Menu Item
HDMI Settings CTRL FOR HDMI [xxx]
AUDIO OUT [xxxxxx]
SW LEVEL [xxxdB]
System Settings NAME IN ? [xxxxxxxx]
12V TRIG. MAIN [xxxxx]
12V TRIG. ZONE2 [xxxxx]
12V TRIG. ZONE3 [xxxxx]
RS-232C CONTROL [xxx]
To change the display
You can check the sound field, etc., by
changing the information on the display.
1
Press AMP.
The receiver can be operated using the
remote.
2
Select the input for which you want to
check the information.
3
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When tuning in a channel from a satellite
tuner
Channel name t Channel number t
Category t Artist name t Song title t
Composer name (SIRIUS only) t Signal
strength t Sound field type
Parameter
OFF, ON
TV+AMP, AMP
AUTO, +10dB, 0dB
OFF, CTRL, ZONE, INPUT
OFF, CTRL, ZONE, MAIN
OFF, CTRL, ZONE, MAIN
OFF, ON
Initial
setting
OFF
AMP
AUTO
OFF
OFF
OFF
ON
121 GB