Publicité
Les langues disponibles
Les langues disponibles
CLEANING
Removing the oven window
Aqua Clean function
Aqua Clean function
EN 22
The glass in the oven door can be cleaned from the inside, but you do
need to remove the glass from the door to do this. First remove the oven
door (see chapter 'Removing the oven door').
1. Lift the brackets on the left and right side of the door upwards slightly
(to marker 1 on the bracket) and pull this away from the glass slightly
(to marker 2 on the bracket).
2. Grasp the glass at the bottom and gently lift this upwards to remove
it from the support.
3. The inner third glass (depending on the model) can be removed by
lifting this carefully and removing it. Also remove the rubber seals
around the glass.
To replace the glass pane, observe the reverse order. The markings
(semicircle) on the door and the glass pane should overlap.
With the Aqua Clean function and a damp cloth, you can easily remove
grease and dirt from the oven walls.
Using the Aqua Clean function
Only use the cleaning programme if the oven is cold. If the oven is hot, it
is more difficult to remove dirt and grease using this programme.
1. Remove all accessories and guide rails from the oven.
2. Pour approximately 0.15 litres of water into the bottom of the empty
oven.
3. Turn the 'oven function dial' to ' A qua Clean' . A pictogram will appear,
together with the preset temperature and time
(30 minutes).
4. Food remains on the enamel walls will be sufficiently soaked after 30
minutes so that they can be removed with a damp cloth.
Publicité
