Publicité
Les langues disponibles
Les langues disponibles
CLEANING
Removing the oven door
The oven door is fitted with a system that dampens the door closing
force, starting at the 75-degree angle. It allows simple, quiet, and
smooth closing of the door. A gentle push (to a 15-degree angle relative
to the closed door position) is enough for the door to close automatically
and softly.
If the force applied to close the door is too strong, the effect of the
system is reduced or the system will be bypassed for safety.
1. First, fully open the door (as far as it will go).
2. Rotate the stoppers back by 90°.
3. Slowly close the door until the stoppers are aligned with the hinge
beds. At the angle of 15° (relative to the closed door position),
slightly lift the door and pull it out from both hinge beds on the
appliance.
To replace the door repeat these actions in reverse. If the door does not
open or close properly, make sure the hinges are positioned correctly in
their slots.
Always ensure that the catches fit properly in their slots. Never
allow the hinge fitting to spring out because the central springs are
very strong and can cause injury.
EN 21
Publicité
