Brewing Senseo Coffee - Philips HD7854 Mode D'emploi

EnglisH
10
7 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time.
During the flushing cycle, the water in the water reservoir is flushed
,
through the machine and the boiler is filled with water. The flushing
cycle takes some time (approx. 90 to 150 seconds).
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
Note: During the flushing cycle, the machine produces more noise than during
a regular brewing cycle.
, The machine switches off automatically when the flushing cycle ends.
Now your Philips SENSEO
Note: If the machine does not work, repeat steps 1-7. Do not interrupt the
flushing cycle.
Brewing sEnsEo
®
tips for the best sEnsEo
- Use fresh water every time.
- Use the SENSEO
®
Douwe Egberts for your SENSEO
- Always use milk at refrigerator temperature (5-8°C) to obtain hot
frothed milk of high quality for your cappuccino, latte macchiato or
caffè latte.
- We advise you not to use rice or soy milk. These types of milk do not
produce high-quality frothed milk.
- Remove used coffee pods directly after brewing.
- Rinse the milk container unit after you have brewed a cappuccino, latte
macchiato or caffè latte with the CLEAN button (see section 'Rinsing
after every use' in chapter 'Cleaning the milk container unit').
- Clean the milk container and the lid thoroughly if you are not going to
use the milk container again that day (see section 'Cleaning all parts after
the last use of the day' in chapter 'Cleaning the milk container unit').
- If you have not used the coffee machine for some time, flush the
machine before you use it again (see section 'Flushing the coffee machine
in chapter 'Cleaning the machine') with fresh water before you use it again.
coffee machine is ready for use.
®
coffee
quality
®
coffee pods that have been specially developed by
coffee machine for a full, round taste.
®