Brewing Senseo ® Coffee - Philips Senseo HD7873 Mode D'emploi

To start flushing, press the 1-cup button q
11
and the 2-cup button qq briefly at the same
time. The on/off button starts flashing to
indicate that the flushing cycle has started.
• During the flushing cycle, the boiler fills itself
with water from the water reservoir and cold
water comes out of the coffee spout. During
the flushing cycle, the machine produces more
noise than during a regular brewing cycle.
• When all the water in the water reservoir
has been used up, the flushing cycle is
finished and the machine switches off.
Fill the water reservoir with fresh tap water,
12
put the lid on it and place it back onto the
machine.
Your SENSEO machine is now ready for use
®
so that you can brew your first cup of delicious
coffee.
6 Brewing SENSEO
coffee
While the SENSEO coffee machine is heating
®
up, you can select the coffee strength you prefer
and the number of cups you want to brew. The
machine then brews the cup or cups immediately
after it has heated up.
Make sure that the water reservoir is filled
1
with fresh cold tap water beyond the MIN
level (1) and that the lid is on the water
reservoir (2).
®
11