Yamaha AM802 Manuel D'instructions page 8

SAMPLE APPLICATION
A Small Sound Reinforcement System
In this small sound reinforcement system the required sources are connected to the appropriate input chahnel connec¬
tors. The AUX SND 1 output is connected to a digital signal processor for reverb and other effects, and the stereo
output from the signal processor is returned to the AUX RTN 1 connectors. The AUX 1 controls can thus be used to set
up the required effect mix. The AUX 2 and AUX 3 controls are used to provide two different monitor mixes for groups
of performers on stage — one for the instrumentalists and one for the vocalists, for example. The AUX SND 2 and AUX
SND 3 outputs are therefore connected to power amplifiers driving the on-stage monitor speaker systems. The main
house power amplifier/speaker system can be fed by the ST OUT L and R outputs. In this system a tape player is
connected to the AUX RTN 2 inputs to provide background music during intermission or recorded accompaniment for
the performance.
LINE-LEVEL SOURCES
MICROPHONES