Riello RS 70 Instructions Pour Installation, Utilisation Et Entretien page 2

1 General warnings
1.1 Guarantee and responsibility
The rights to the guarantee and the responsibility will no longer be
valid in the event of damage to things or injury to people, if such
damage/injury was due to any of the following causes:
➤ intervention of unqualified personnel;
➤ carrying out of unauthorised modifications on the equipment;
➤ powering of the burner with unsuitable fuels;
➤ faults in the fuel supply system;
➤ repairs and/or overhauls incorrectly carried out;
➤ use of non-original components, including spare parts, kits,
accessories and optional;
➤ force majeure.
1.2 Installation safety notes
It is obligatory to carry out all installation, mainte-
nance and disassembly operations with the electric-
ity supply disconnected.
DANGER
Isolate the fuel supply.
DANGER
2 Technical description
This manual provides instructions for preparing the burner to oper-
ate with the kit.
2.1 Equipment
Bar extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Ignition pilot tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Flame tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
2.2 Replacement of components
Before carrying out any maintenance, cleaning or checking opera-
tions:
Disconnect the electricity supply from the burner by
means of the main switch of the system.
DANGER
Wait for the components in contact with heat sourc-
es to cool down completely.
Replace the components installed in the burner with the compo-
nents available in the kit as shown in Fig. 1.
2915798
Kit for long combustion head
The manufacturer furthermore declines any and every responsibil-
ity for the failure to observe the contents of this manual.
– Personnel must always use the personal protective equipment
envisaged by legislation and follow the indications given in this
manual.
– Personnel must observe all the danger and caution indications
shown on the machine.
– Personnel must not carry out, on their own initiative, operations
or interventions that are not within their province.
– Personnel must inform their superiors of every problem or dan-
gerous situation that may arise.
WARNING
CAUTION
Square . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Electrode connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
U bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Technical instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
1 GB
The installation must be carried out by qualified per-
sonnel, as indicated in this manual and in compli-
ance with the standards and legal requisites in
force.
After removing all the packaging, check the integrity
of the contents. If in doubt, do not use the kit; con-
tact the supplier.
After carrying out maintenance, cleaning or check-
ing operations, reassemble the cover and all the
safety and protection devices of the burner.