Connecting Peripheral Equipment; Connection With A Pc - Sharp PN-655RE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting Peripheral Equipment

Caution
Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the equipment to be connected.

Connection with a PC

PC digital RGB input terminal
Connect using a DVI cable (commercially
available).
PC analogue RGB input terminal
Connect using a PC analogue signal cable
(commercially available).
TIPS
• For compatible signal timing (see page 50).
• The PC digital RGB input terminal can be connected with a PC which has a DVI-compliant output terminal.
(However, images may not be displayed properly depending on the computer to be connected.)
• Use the automatic screen adjustment when a PC screen is displayed for the fi rst time with the analogue RGB
connection, or when the setting of the PC is changed (see page 31).
• When the analogue RGB connection is used, the type of sync signal is automatically determined (Composite sync,
Horizontal/Vertical separate, or Sync-on-green). With some video signals, however, the sync signal may not be
detected and images may not be displayed properly.
PC audio input terminal
Connect using a PC audio cable
(commercially available).
Use a cable without resistance for the PC
audio cable.
11
E

Publicité

Table des Matières
loading

Table des Matières