Installation Procedures - Toto TLT10 Manuel D'installation Et D'utilisation

CAUTION: RISK OF PERSONAL INJURY.
This valve requires the maximum outlet temperature to be set/adjusted by the installer.
The maximum outlet water temperature should never exceed 110ºF (43.3°C).
1) Turn off the main water supply.
2) Connect the hot water supply to the inlet marked "H" and the cold water supply to
the inlet marked "C".
Supply hose
Angle stop
INSTALLATION PROCEDURE
Thermostatic valve
Controller
Supply hose
G1/2
(Supply hoses are not included)
(G1/2 compatible with ½ NPSM)
4
Supply hose
Angle stop