Installation Fm - Emerson Rosemount 3900 Manuel De Référence

Manuel de référence
00809-0103-3900
ATEX Notified Body for EC Type Examination Certificate & Quality Assurance
Déclaration de conformité CE
EU Declaration of Conformity
No: RAD 1119 Rev. A
Model 3300HTVP-70 Insertion/submersion pH sensor with Variopole connector & Smart
preamplifier
Model 3400HT Retractable pH sensor with integral cable
Model 3400HTVP Retractable pH sensor with Variopole connector
Model 3400HTVP-70 Retractable pH sensor with Variopole connector & Smart preamplifier
Model 3500P-01 High performance pH sensor with integral cable & Smart preamplifier
Model 3500P-01-12 PerpH-X ORP sensor with integral cable & preamplifier: T4 (-20°C ≤ Ta ≤
+80°C)
Model 3500P-02 High performance pH sensor with integral cable
Model 3500VP-01 High performance pH sensor with Variopole connector & Smart preamplifier
Model 3500VP-01-12 PerpH-X ORP sensor with Variopole connector & preamplifier: T4 (-20°C
≤ Ta ≤ +80°C)
Model 3500VP-02 High performance pH sensor with Variopole connector
Model 3800 Steam sterilizable pH sensor with single pole Eurocap connector
CE marking was first affixed to this product in 2011
Model 3800VP Steam sterilizable pH sensor with Variopole connector
Model 3900-01 pH/ORP sensor with integral cable & Smart preamplifier
Model 3900-02 pH/ORP sensor with integral cable
Model 3900VP-01 pH sensor with Variopole connector & Smart preamplifier
Model 3900VP-02 pH/ORP sensor with Variopole connector
Special conditions for safe use:
1) All pH/ORP sensor models with a plastic enclosure or exposed plastic parts may
provide an electrostatic ignition
hazard and must only be cleaned with a damp cloth to avoid the danger of ignition due to
a buildup of electrostatic
charge.
2) All pH/ORP sensor models with a metallic enclosure may provide a risk of ignition by
impact or friction. Care should be
taken during installation to protect the sensor from this risk.
3) External connections to the sensor must be suitably terminated and provide a degree of
protection of at least IP20.
All pH/ORP sensor models are intended to be in contact with the process fluid and may
not meet the 500V r.m.s test to earth. This must
be taken into consideration at installation.
Harmonized Standards:
EN 60079-0:2012+A11:2013
EN 60079-11:2012
SGS Baseefa Limited [Notified Body Number: 1180]
Rockhead Business Park Staden Lane
SK17 9RZ Buxton
United Kingdom
Déclaration de conformité CE
Page 3 of 3
Septembre 2018
19