Publicité
Les langues disponibles
Les langues disponibles
4.
Slide the splinter blow-off/suction selector
switch (4) to the left to the position for dust
extraction.
4
Available accessories
Warning
Only use accessories and additional
equipment specified in the instructions.
Using insertion tools or accessories other
than those specified in the instructions
may cause a risk of injury.
Designation
Jigsaw blade set for wood,
10-piece
Jigsaw blade set for metal,
10-piece
42
3
10
Article number
6.215.001.101
6.215.001.131
850W pendulum action jigsaw PJSS 11-230V
Errors and faults
The device has been checked for proper functioning
several times during production. If malfunctions
occur nonetheless, check the device according to
the following list.
Troubleshooting tasks which require the housing to
be opened must only be carried out by an
authorized specialist electrical company or by
Trotec.
Light smoke or odour is emitted during the first
use:
•
This is not a fault. These phenomena
disappear after a brief runtime.
The device does not start:
•
Check the power connection.
•
Check the power cable and mains plug for
damage. If you notice damages, do not try to
take the device back into operation.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
•
Check the on-site fusing.
Info
Wait for at least 10 minutes before
switching the device back on.
The saw blade is loose:
•
Make sure that the saw blade is firmly locked
in place in the designated recesses of the
quick-release chuck.
•
Make sure that the quick-release chuck is
locked.
EN
Publicité
