Publicité
Les langues disponibles
Les langues disponibles
Switching the device on and off
Warning
The event of a temporary power
failure can lead to the device
accidentally switching on.
Even if there is no voltage present,
always switch the device off using the
on/off switch.
Hold onto the mains plug while pulling
the power cable out of the mains socket.
Wear your personal protective equipment when
working with the device.
1.
Check whether the fixed saw blade, the set
stroke rate, the pendulum action and the
cutting angle are suitable for the intended
application.
2.
Check whether the workpiece is secured and
the worktop prepared correspondingly.
3.
Position the base plate with the sliding
block (6) on the workpiece.
4.
Slide the on/off switch (2) to 0.
5.
Slide the on/off switch (2) to I to switch the
device off.
EN
Setting the splinter blow-off/suction function
You can choose whether the splinters shall be
blown off towards the front or sucked off with an
optionally connectable vacuum cleaner.
1.
2.
16
Connecting the dust extraction system
You can connect a vacuum cleaner to the device.
The adapter included in the scope of delivery allows
to connect smaller pipe diameters.
2
1.
2.
3.
850W pendulum action jigsaw PJSS 11-230V
Make sure that the protective cover (16) is
mounted.
Slide the blow-off/suction function selector
switch (4) to the left to suck the splinters in
using an external vacuum cleaner, or to the
right to blow the splinters away.
4
Caution
Use a special vacuum cleaner to suck off
harmful or toxic materials.
If required, attach the adapter (10) to the
connection for the dust extraction system (3).
For an optimum dust extraction, insert the
anti-splinter guard (11) if possible.
Connect a suitable vacuum cleaner (e.g.
industrial vacuum cleaner) to the dust
extraction (3).
41
Publicité
