Publicité
Les langues disponibles
Les langues disponibles
1.
Turn the setting wheel (1) to the desired
stroke rate level.
Adjusting the pendulum action
You can adjust the pendulum movement of the saw
blade. Levels 1 to 3 allows for a faster work
progress and level 0 (pendulum movement off)
enables fine and clean cutting edges.
The ideal pendulum level for the respective
application can be determined by way of field-
testing. Please observe the following instructions:
•
If you want to obtain a fine and clean cutting
edge, preferably select a low pendulum level
or switch off the pendulum action completely.
•
Switch off the pendulum action when
processing thin materials.
•
Work at a low pendulum level when
processing hard materials.
•
For soft materials or when sawing wood with
the grain you can work with the maximum
pendulum level.
EN
1
850W pendulum action jigsaw PJSS 11-230V
1.
Set the pendulum action selector switch (5)
to the desired level. The higher the level, the
larger the pendulum stroke. The pendulum
action can also be adjusted during operation.
0
I
II
III
Connecting the power cable
1.
Insert the mains plug into a properly secured
mains socket.
Operation
Tips and notes on handling the jigsaw
General information:
•
Keep the venting slots clear to prevent the
motor from overheating.
•
Check the tool in the tool holder for proper fit
before every application. The tool must be
firmly locked in place in the designated
holding fixtures in the tool holder.
•
Before every application, make sure that you
have selected the correct tool for the
intended use.
5
39
Publicité
