Publicité
Les langues disponibles
Les langues disponibles
Specific failure and solution
Failure
The LED does not come on
when the hob is plugged
in.
Some buttons don't work,
or the LED display is not
working normally.
The cooking mode
indicator comes on, but
heating does not start.
Heating suddenly stops
during operation and the
symbol
flashes on the
display.
Heating zones of the same
side (such as the first and
the second zones) would
display the symbol
Fan motor sounds
abnormal.
Problem
No power supplied.
The accessorial power
board and the display board
connected failure.
The accessorial power board
is damaged.
The display board is
damaged.
High temperature of the hob.
There is something wrong
with the fan.
The power board is damaged. Replace the power board.
Pan type is incorrect.
Pot diameter is too small.
The hob is overheated.
The power board and the
display board connection
fails.
The display board of
communicate part is
.
damaged.
The Main board is damaged.
The fan motor is damaged.
Solution
Check to see if plug is
secured tightly in outlet and
that outlet is working.
Check the connection.
Replace the accessorial
power board.
Replace the display board.
Ambient temperature may
be too high. Air intake or air
vent may be blocked.
Check whether the fan runs
smoothly. If not, replace the
fan.
Use a correct pan (refer to
'Pan').
The hob is overheated. Wait
for temperature to return to
normal.
Touch and hold
for about
3 seconds.
Pan detection circuit is
damaged, replace the power
board.
Check the connection.
Replace the display board.
Replace the power board.
Replace the fan
87
Publicité
