Publicité
Les langues disponibles
Les langues disponibles
A (mm)
760
WARNING: Ensuring Adequate Ventilation
Make sure the induction hob is well ventilated and the air inlet and outlet are
not blocked. If drawers are fitted below the hob sometimes the underneath of
the hob may get hot. To prevent items accidently touching the base of the hob,
it is necessary to put a wooden insert, fixed by screws, at a minimum distance of
50mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these
holes are not blocked by the worktop when you put the hob into position.
Make sure that the glue that joins the plastic or wooden material to the cabinet is
able to resist temperatures up to 150°C. The rear wall, adjacent and surrounding
surfaces must be able to withstand a temperature of 90°C.
Installing the brackets
Fix the hob to the worktop using 4 brackets on the base of the hob.
B (mm)
C (mm)
Min. 50
Min. 20
D
E
Air intake
Air exit 5mm
71
Publicité
