Publicité
Les langues disponibles
Les langues disponibles
Cut a hole in the worktop of the dimension shown in the diagram below. A
minimum of 50 mm space should be left around the hole. The worktop should be
at least 30 mm thick and made of heat-resistant material.
Note:
The safety distance between the sides of the hob and the inner
surfaces of the worktop should be at least 3 mm.
6.2
5.8
It is essential that the induction hob is well ventilated and that the air intake and
exit are not blocked.
Make sure the hob is correctly installed as shown.
For safety, the gap between the hob and any cupboard above it
should be at least 760 mm.
70
INSTALLATION
Min.3mm
Publicité
