Publicité
Les langues disponibles
Les langues disponibles
4.
The boost function will only operate for about 5 minutes and then the
cooking zone will return to the original heating setting.
• If the original heat setting is 0, it will return to 9 after 5 minutes.
To cancel this function
1.
Touch
or
2.
While the power level is flashing, touch
Or, you can touch
display for a while.
The cooking zone will return to the original power setting.
Safety lock
When the cooking zones operate, you can lock the control panel except
It prevents an accidental change of the settings.
•
To activate this function, touch and hold
symbol "Lo" will flash on the display.
The induction hob enters the locking state with the keys disabled except
.
•
To deactivate this function, touch and hold
the symbol "Lo" disappears from the display.
and the power level will flash on the display.
and
at the same time. "0" will flash on the
for about 2 seconds and the
for about 2 seconds until
.
79
Publicité
