VOLTCRAFT BS-600SD Notice D'emploi page 30

e) Connection to a TV
• First set the video output format (see chapter "Settings").
• Open the cover on the right next to the monitor.
• Connect the jack plug of the video cable to the video output (13) on the endoscope and
connect the cinch plug to the video input of the TV.
• As a result the picture on the monitor turns off and the camera picture is displayed on the
TV. Press the MENU button to display the menu on the TV. The device is operated with the
buttons on the monitor.
• Recorded videos can be played on the TV.
12. MAINTENANCE AND CARE
• The product does not require any maintenance, do not disassemble it. Maintenance or
repairs may be carried out by a professional only.
• Do not clean the product if the rechargeable battery of the monitor is charged.
• First remove all the batteries/rechargeable batteries from the charging slots.
• Clean the exterior of the product using a clean, soft, dry cloth only. You can easily remove
dust using a clean, soft brush or a vacuum cleaner.
• After use in liquids, always thoroughly rinse the camera neck with clean water and dry
before storing the product in the case.
• To clean the camera lens, use a small brush or cotton swabs.
• Do not use any aggressive cleaning agents or chemical solutions as these may damage the
housing causing discoloration and/or malfunction.
30