Publicité
Les langues disponibles
Les langues disponibles
Problem
The appliance stops during a
program.
The appliance makes unusual
sounds during a program.
There is food waste left on the
dishes.
There are white stains on the dishes.
The dishes are not dry.
There are rust stains on the dishes.
Possible cause
There is a power failure.
There is a water inlet failure.
One of the spray arms hits the
dishes.
The appliance is not loaded correctly
and the spray arms cannot reach all
the dishes.
The appliance is not loaded
correctly.
The amount of detergent is
insufficient.
The selected program is not suitable
for the loaded dishes.
One of the spray arms is clogged.
The filters are clogged.
The filters are not placed correctly.
The water drain pump is clogged.
The amount of detergent is
insufficient.
The level of rinse aid consumption is
set too low.
There is a high level of water
hardness and no salt is used.
The cap of the salt reservoir is not
closed correctly.
The selected program does not
include drying.
The level of rinse aid consumption is
set too low.
The stainless steel quality of the
dishes is insufficient.
Possible solution
Make sure that there is power.
Make sure that there is water inlet
supply.
Make sure that you load the
appliance correctly. Refer to section
Loading the appliance
.
Make sure that you load the
appliance correctly. Refer to section
Loading the appliance
.
Make sure that you load the
appliance correctly. Refer to section
Loading the appliance
.
Make sure that you fill the detergent
reservoir with a sufficient amount of
Filling the
detergent. Refer to section
detergent reservoir
.
Choose a suitable program. Refer to
Programs
section
.
Clean the spray arms. Refer to
section
Cleaning the spray arms
Clean the filters. Refer to section
Cleaning the filters
.
Make sure that you correctly place
the filters.
Make sure that the water drain pump
is not clogged.
Make sure that you fill the detergent
reservoir with a sufficient amount of
Filling the
detergent. Refer to section
detergent reservoir
.
Adjust the level of rinse aid
consumption. Refer to section
Setting the level of rinse aid
consumption
.
Fill the salt reservoir. Refer to
section
Filling the salt reservoir
Make sure that the cap of the salt
reservoir is closed firmly.
Choose a program that includes
drying. Refer to section
Programs
Adjust the level of rinse aid
consumption. Refer to section
Setting the level of rinse aid
consumption
.
Make sure that you only clean
dishwasher-safe dishes in the
appliance.
English
.
.
.
•
51
Publicité
