Télécharger Imprimer la page

Inventum VVW4530AW Manuel D'utilisation page 45

Lave-vaiselle non-encastré

Publicité

Les langues disponibles

Les langues disponibles

1. Open the rinse aid reservoir (A).
2. Fill the reservoir (B) with rinse aid until the MAX level.
Caution:
Remove any spilled rinse aid immediately. Spilled rinse aid can form extreme foam which can cause
leaks.
SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
Set the level of rinse aid consumption according to the information in section
Note:
As a default, the level of rinse aid consumption of the appliance is set to level 4.
1. Make sure that the appliance is off.
2. Push the on/off button to start the appliance.
3. Push and hold the program selector button immediately after the appliance is turned on.
4. Hold the program selector button until the display briefly shows rA. After that the display shows the latest set level
of rinse aid consumption.
5. Push the program selector button to change the level of rinse aid consumption.
6. Push the on/off button to confirm the setting.
LOADING THE APPLIANCE
Correctly placing dishes into the appliance has a positive effect on the energy consumption and the washing and
drying performance of your appliance.
You can place dishes in the cutlery basket, the upper basket and the lower basket.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the upper and lower
spray arm. If the spray arms are blocked they cannot spin during washing.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the latch of the
detergent reservoir. If the detergent reservoir is blocked, it cannot open during washing.
Note:
Make sure that you rinse the dishes before loading the appliance.
Note:
Do not overload the baskets or load dishes in the wrong basket.
Loading the cutlery basket
The cutlery basket is designed for loading cutlery.
Warning:
Place sharp items of cutlery, such as knives and forks, face down in the cutlery basket to prevent injury.
Caution:
Make sure that there are no items of cutlery sticking out of the bottom of the basket.
Rinse aid consumption settings
English
(Figure 13)
(Figure 14)
.
45

Publicité

loading