Inventum VVW4530AW Manuel D'utilisation page 47

CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
5. Push the start/pause button to start the program.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Push the start/pause button.
2. Wait until the program stops.
3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 24 hours.
1. Push the timer button to delay the start time of a program.
2. Push the start/pause button.
3. Push the timer button to increase the time by 1 hour.
4. Push the start/pause button to activate the timer.
Note:
Set the time to 0 to cancel the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
1. Push and hold the start/pause button for 3 seconds. The program-step indicator for Dry comes on.
The water inside the appliance drains in about 30 seconds.
2. Wait until the program-step for End comes on.
3. Push the on/off button to cancel the program.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
Activating the child lock
1. Push the tablet detergent button for 3 seconds to activate the child lock. All indicators flash and the display shows
CL.
Programs
.
Delaying the program
.
English • 47