Kärcher RCV 3 Mode D'emploi page 19

Connecting the cleaning robot with the
charging station
Illustration E
1. Place the cleaning robot on the floor in front of the
charging station.
2. Press and hold the on/off switch for 3 seconds.
The cleaning robot switches on.
3. As soon as the display lights up, place the cleaning
robot manually on the charging station and make
sure that the charging contacts have a good contact.
After the initial start-up, the cleaning robot automatically
moves to the charging station.
Connecting cleaning robots with WLAN and
The cleaning robot can be controlled directly via buttons
on the device or via an App using a WLAN-enabled mo-
bile device. To be able to use all available functions we
recommended controlling the cleaning robot via the
Kärcher Home Robots App.
Before you download the App, make sure you have the
following:
● The mobile device is connected to the Internet.
● The 2.4 GHz WLAN of the router is activated.
● Sufficient WLAN coverage is guaranteed.
Download the Kärcher Home Robots App from the Ap-
®
ple App Store or from the Google Play™ store.
● Google Play™ and Android™ are trademarks or
registered trademarks of Google Inc.
®
● Apple and App store
trademarks of Apple Inc.
The Kärcher Home Robots App offers the following
main functions, among others:
● Mapping of the rooms and several floors
● Setting of time schedules
● Definition of no-go zones and virtual walls
● Notes on faults or malfunctions and the cleaning
progress
● Setting of cleaning preferences (suction modes)
● Establishment of cleaning zones
● Activation/deactivation of the "Do not disturb" mode
● FAQ with detailed troubleshooting
● Contact details for the KÄRCHER Service Centres
Connecting the cleaning robot with the Kärcher
Home Robots App and WLAN:
1. Download the KÄRCHER Home&Garden App from
the Apple App Store or from the Google Play Store.
2. Open the Kärcher Home Robots App.
3. Create an account (if you are not already regis-
tered).
4. Add the desired cleaning robot.
5. Follow the step-by-step instructions in the App.
App
®
are trademarks or registered
Installing 2-in-1 dust container with water
The 2-in-1 dust container with water reservoir may con-
tain a small amount of residual water due to quality con-
trol. This is normal.
Use the 2-in-1 dust container with water reservoir when
you want to clean both dry and wet.
For dry cleaning, remove the wiper cloth and the wiper
cloth holder, see chapter Removing the wiper cloth
holder with wiper cloth.
Illustration F
1. Open the cover at the top.
2. Press the 2-in-1 dust container with water reservoir
into position until it audibly latches into place.
3. Close the cover at the top.
Removing the 2-in-1 dust container with
Illustration G
1. Open the cover at the top.
2. Press the clamp.
3. Remove the 2-in-1 dust container with water reser-
voir.
Installing the wiper cloth holder with wiper
1. Attach the wiper cloth to the wiper cloth holder.
Illustration H
a Press the wiper cloth onto the wiper cloth holder.
b Press on the hook and loop strip.
2. Install the wiper cloth holder.
Illustration I
a Press the clamps together.
b Push the wiper cloth holder horizontally into the
cleaning robot until it audibly latches into place.
Removing the wiper cloth holder with wiper
1. Press any button.
The cleaning robot stops.
2. Remove the wiper cloth holder.
Illustration J
a Press the clamps together.
b Remove the wiper cloth holder.
c Pull the wiper cloth off the wiper cloth holder.
Installing the dust container
Install the dust container if you only want to dry clean.
For dry cleaning, remove the wiper cloth and the wiper
cloth holder, see chapter Removing the wiper cloth
holder with wiper cloth.
Illustration K
1. Open the cover at the top.
2. Press the dust container into position until it audibly
latches into place.
3. Close the cover at the top.
Removing the dust container
Illustration L
1. Open the cover at the top.
2. Press the clamp.
3. Remove the dust container.
Reset WLAN connection
If you switch to a new router or change your WLAN
password, you must reset the cleaning robot's WLAN
connection.
English
Initial startup
reservoir
water reservoir
cloth
cloth
19