Option D: Attachment with Arm to CR1 Wheelchair
1. Slide the square head bolt through the hole in the arm
attachment bracket.
2. Hook the top of the arm assembly onto the clamp.
3. Widen the clamp opening to fit the plastic mounting bracket
between the clamp and the arm assembly. Center the bracket
on the clamp. Pinch the clamp and housing together to force
the bolt through the hole in the clamp.
4. Finger-tighten the hex nut onto the bolt.
5. Tighten until secure, using the provided external hex wrench
tool or a flathead screwdriver.
EN - SpeedControl Installation Instructions
1
3
4
-
9
2
5