Permobil SpeedControl Instructions D'installation page 5

Option B: Attachment with arm
1. Slide the square head bolt through the hole in the arm
attachment bracket.
2. If using rubber insert #22, #25 or #28, place the rubber insert
onto the frame tube and place the clamp onto the rubber
insert. Then skip to 4.
3. If using rubber insert #32 or #38, place into the clamp. Hold in
place onto the tube.
4. Hook the top of the arm assembly onto the clamp. Pinch the
clamp and housing together to force the clamp over the bolt
end.
5. Finger tighten the hex nut onto the bolt.
6. Tighten until the arm assembly is secure, using the provided
external hex wrench tool or a flathead screwdriver. When
properly secured, the arm assembly will not rotate.
EN - SpeedControl Installation Instructions
1
4
5
- 5
2
6
3