Permobil SpeedControl Instructions D'installation page 7

Option C: Direct Attachment to CR1 Wheelchair
1. Slide the square head bolt into the slot on the rear of the
housing.
2. Angle the clamp, as shown, and hook the top part of the
clamp onto the rear of the housing.
3. Widen the clamp opening to fit the plastic mounting bracket
between the clamp and the rear of the housing. Center the
bracket on the clamp. Pinch the clamp and housing together
to force the bolt through the hole in the clamp.
EN - SpeedControl Installation Instructions
1
2
3
- 7