Permobil SpeedControl Instructions D'installation page 11

Attachment Arm: Rotational Adjustment
Follow these instructions if mounting the attachment arm on the
left side of the wheelchair, or if a different operational range of
the arm is desired.
1. Remove the M6 bolt using the provided 5mm hex wrench.
Pull the attachment arm (A) away from the mounting bracket
assembly (B).
2. Remove the arm stop piece (C) from the mounting bracket
assembly (B).
- For left-side mounting, rotate the arm stop piece to 180
degrees.
- You can rotate the arm stop piece in a different orientation
if you would like the rotation of the arm to differ from the
out-of-the-box adjustment setting.
3. Once you have the desired rotation, reassemble all
components, and fasten with the bolt. Tighten the bolt
to achieve the amount of force that you want in the arm
adjustment.
EN - SpeedControl Installation Instructions
1
2
3
- 11
B
C
A