Checking The Clutch Fluid Level - Sherco 250 SEF/R Manuel Du Propriétaire

CHECKING THE CLUTCH FLUID LEVEL

- Turn the knob
move the lever away from the handlebar.
B
Clutch lever free play A
h
1
- The hydraulic fluid is highly corrosive it can be dan-
2
gerous to the skin.
3
- Read the recommendations on the container.
Position the master cylinder horizontally.
- Remove the two screws
and the membrane
- Check the fluid level and fill if necessary.
Level of brake fluid below
the top of the reservoir.
Minerva brake fluid DOT 4
- Reinstall the lid with the membrane and the
screws.
in the opposite direction to
B
≥3mm
ATTENTION
1
3
, the cover
2
4mm
105