Safety Information - Sherco 250 SEF/R Manuel Du Propriétaire

Conduite (suite)
1.Close the throttle before changing gears.
2. Engage the lowest gear.
3. Partially open the throttle while engaging the clutch.
n Parking
- Stop the bike with the stop button. The keyless system will automatically switch off the igni-
tion after 30secondes of non use of the bike.
Become familiar with all of the controls and their functions before using the vehicle.

Safety information

- Do not drive after consuming alcohol.
- Wear a helmet when using the vehicle.
- Keep the machine in good working order and maintain it properly so that it is reliable and
safe for use.
- Gasoline is flammable, refuel the motorcycle when the engine is stopped.
- Exhaust fumes are toxic, you should never start the engine in a closed building.
- Always park the vehicle on a flat hard surface, do not park the vehicle on a slope or on soft
ground. Always control the balance of the vehicle.
- Check the following every day before riding the motorcycle:
Tires :
Engine oil :
Gasoline :
Transmission chain
Direction of travel :
Brakes :
Throttle :
Clutch :
Electrical Equipment :
Components (nut, bolts ...): Verify that all components of the vehicle are properly
If you experience a problem with any of the components of the motorcycle, consult the
Service and Adjustments section of this manual or contact a Sherco dealer.
Wear and pressure
Level ( p.88)
☛
Check the level and make sure there are no leaks
Properly lubed and adjusted (
Make sure that your path is clear
Operation, fluid leakage, brake pad wear (
Proper operation (
☛
Proper operation (
☛
Operation of the horn and lights (
tightened ( p.125)
☛
p.103)
☛
p.87)
p.104)
p.74 and p.76)
☛
p.112 to p.115)
☛
83