Publicité
Les langues disponibles
Les langues disponibles
as standard outfit.
The cover, designed to make the child's walk more
comfortable as well as to guarantee extra protection during
the colder season, can be easily removed.
fig. 60
To remove it, simply undo the two snap fasteners
(E7) that lock the side panels of the upholstery to the chassis,
thus releasing the two side anchors (E8).
fig. 61
Remove the back straps from both shoulder
straps, then pull them and the lumbar straps out of the slots
provided.
fig. 62
Remove the cover (F) from the backrest by pulling
the shoulder straps out of their respective slots. Take care to
detach it correctly at the rear adjustment device (E1).
STROLLER SEAT LINING MAINTENANCE
It is recommended to remove the lining periodically to
provide for its correct maintenance.
To facilitate covering removal, first remove the hood, bumper
bar and the Comfort Cover.
fig. 63
Detach the two lower snap fasteners (E9) that
secure the cover to the seat.
fig. 64
Unfasten the two side buttons (E7), remove the
side panels from their seats, then the cover from the footrest.
fig. 65
Remove the crotch strap from its protective pad,
releasing it from the locking elastic, then from the slot on the
seat.
fig. 66
Pull the lower back straps out of the slots in the
centre of the backrest.
fig. 67
Unbutton the two straps (E10) that secure the
cover to the lumbar structure, then pull the two anchoring
straps (E11) out of the appropriate slots (E12).
fig. 68
Release the cover from the side hood joints, pull
the back straps out of the slots on the cover, then pull it off
the back structure.
REMOVAL/INSTALLATION OF THE SAFETY HARNESS
SYSTEM
The All Season stroller is equipped with a safety harness
system that can be removed if necessary.
fig. 69
To remove the crotch strap, pull the lower ring
(E13) out of the slot on the seat (E14).
fig. 70
To remove the lower back strap, push the belts
through the slot on the backrest (E15) and pull one portion
firmly until the ring (E16) is released from its seats. Then
remove the ring (E16) from the slot (E15) and pull the belt
out completely.
fig. 71
To remove the back straps, simply pull them off the
metal rings (E17) that secure them to the backrest tube.
fig. 72
To install the crotch strap, fit the lower ring (E13)
only in the slot on the seat (E14). The lower ring (E18) must
• IMPORTANT
ATTENTIVEMENT
CONSERVER
CONSULTATION FUTURE. NE PAS
TENIR COMPTE DES MISES EN GARDE
ET DES INSTRUCTIONS FOURNIES
PEUT S'AVÉRER TRÈS DANGEREUX
POUR VOTRE ENFANT.
AVERTISSEMENTS
-
LIRE
ET
POUR
remain on the outside.
fig. 73
To reassemble the lower back strap, insert the ring
(E16) in the appropriate slot on the backrest and, once it
is positioned under one of the hooking tabs (E19), push it
firmly into place.
fig. 74
To reattach the back straps, wrap them individually
around the backrest tube, making sure they are not inverted
or twisted.
fig. 75
Insert each belt into its respective metal ring (E17),
taking care that they are positioned outside the backrest
adjustment device (E1).
Caution! Position the back harnesses always at the same
height.
fig. 76
Caution! Make sure that all the belts are
correctly attached to the stroller seat by pulling them
individually.
FOOTMUFF (if available)
fig. 77
Position the footmuff (L), passing it under the
bumper bar, and attach the press studs (L1).
fig. 78
The flap of the footmuff can be extended and
attached in a position suitable for protecting the child from
the cold, fastening it with the external side press studs to the
corresponding elements (L2) on the canopy.
fig. 79
The footmuff can be used both facing the parent
and facing the street.
RAIN COVER (if available)
fig. 80
To fit the rain cover (M), position it on the hood and
button both press studs (M1) on the sides of the stroller seat.
fig. 81
Then hook the bands (M2) around the front tubes,
at the wheel assembly.
INFANT CAR SEAT DARWIN INFANT / DARWIN
INFANT RECLINE (IF AVAILABLE)
ATTACHING THE INFANT CAR SEAT TO THE CHASSIS
fig. 82
Take the infant car seat from the handle and attach
it to the chassis in correspondence of the housings on both
sides of the structure and place it solely facing the parents.
fig. 83
Caution: before use, make sure that the car seat
is properly attached on both sides by pulling it upwards.
DETACHING THE INFANT CAR SEAT FROM THE CHASSIS
fig. 84
Operate the lever (S1) on the back of the seat and
simultaneously lift it from the chassis, gripping it with the
handle.
To use the infant car seat properly, refer to the dedicated
manual.
• VOUS ÊTES RESPONSABLE DE LA
SÉCURITÉ DE VOTRE ENFANT.
• AVERTISSEMENT!
LAISSER
VOTRE
SURVEILLANCE. FAIRE LE MAXIMUM
D'ATTENTION LORSQU'ON UTILISE
LE PRODUIT.
• POUR
ÉVITER
NE
JAMAIS
ENFANT
SANS
DE
GRAVES
37
Publicité
