Pentair Fleck 5810 SXT Guide De L'utilisateur page 7

Feed Water Hardness
A Note:
Determine the feed water hardness in °tH.
F
Adjust the water hardness with
G
Press to validate the selection and advance to the next parameter.
Reserve capacity
A Note:
Determine the reserve capacity in litre or in percentage.
H
Adjust the reserve capacity with
I
Press to validate the selection.
Current day of the week
A Note: Determine the day of regeneration (1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 
6 for Saturday and 7 for Sunday).
J
Adjust the day of the week with
K
Press to validate the selection.
4.2. Diagnostic mode
To access the recorded informations, press
to exit the diagnostic mode.
5 . Operation
5.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• For optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• Do not use ice melt, block, or rock salts;
• The sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the
lifetime of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on
the system.
5.2. Manual immediate regeneration
A
Press and hold
6 . Error codes
The following error codes may be displayed during operation:
---0 Cam sense error:
---1 Motor run ON error: Press any button to clear error. Press
---2 Regen failure:
---3 Memory error:
---4 Fail safe error
7 . Maintenance
A
Mandatory:
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
functioning of the complete system, and be documented in the Maintenance record book.
8 . Troubleshooting
Please follow this procedure for any technical support:
A
Collect the required information for a technical assistance request.
→
Product identification (see 2.1. Safety tags location, page 5 and Original settings, page 2).
B
Contact your local dealer who installed this device (see contact details on last page).
→
Also call him if the water tastes salty, if the water is not softened or if there is no salt consumption.
Ref. MKT-UG-016 / A - 20.06.2017
and .
and
and .
and
for 5 seconds.
Unplug the unit and plug it back. If error continue, call technical support.
Perform a manual regeneration. If error continue, call technical support.
Perform a master reset and reconfigure. If error continue, call technical support.
Unplug the unit and plug it back. If error continue, call technical support.
.
simultaneously for 5 seconds. Press
to advance motor to clear error.
User Guide Fleck 5810-SXT
to see the next data. Press
7 / 28