Publicité
Les langues disponibles
Les langues disponibles
4
2
EN
1
50
KEY TO SYMBOLS
Tightening torque
Threadlocker Medium
Grease
ENGINE OIL
CHECK THE LEVEL
Hold the vehicle upright.
Position the drive on a flat base ensuring
stability.
Remove the inspection cap 1.
The oil level must arrive to the lower edge
of check hole.
Otherwise restore the oil level through
plug 2.
Use the oil indicated on page 16 in
the "Recommended lubricants and liquids"
table.
REPLACEMENT
Always perform the replacement when
engine is hot:
- Position the drive on a flat base ensuring
stability.
- Remove the engine casing by loosening
the screws shown in the figure.
- Place a container under the engine.
WARNING:
Hot oil can cause severe burns!
Publicité
