CYBEX gold ATON G SWIVE Mode D'emploi page 53

Installing and Removing the Infant Car Seat ONLY
Installing the Infant Car Seat With Lap/Shoulder Belts
WARNING!
!
• NEVER install this Child Restraint using a non-locking vehicle Lap/Shoulder Belt. A
locking clip must be used with a vehicle belt that DOES NOT LOCK. Call ParentLink
Customer Service at 1-877-242-5676 to obtain a locking clip.
• ALWAYS have the Handle in a LOCKED position while using this Child Restraint in a
vehicle (see pg. 26).
• NEVER INSTALL the Infant Car Seat with both the Lap and Shoulder Belts routed
through the Lap Belt Guides.
1. Position Infant Car Seat firmly against
the back of the rear vehicle seat as
shown.
2. Route only the vehicle Lap Belt through
the blue INFANT CAR SEAT LAP BELT
GUIDES and BUCKLE THE BELT.
DEATH or SERIOUS INJURY can occur.
q q w w
CLICK!
53