CYBEX gold ATON G SWIVE Mode D'emploi page 43

Installing and Removing the Infant Car Seat with the Base
Installing with Base Using Lap/Shoulder Belts
WARNING!
!
NEVER install this Child Restraint using a non-locking vehicle Lap/Shoulder Belt. A locking
clip must be used with a vehicle belt that DOES NOT LOCK. Call ParentLink Customer
Service at 1-877-242-5676 to obtain a locking clip.
1. Ensure that LATCH/UAS Connectors are
in the storage position (see pg. 42).
2. Make sure the vehicle is on level ground
and place the Base in an approved
vehicle seating location.
3. Rotate Adapter to Boarding Position and
push button on Belt Tensioner Handle
and pull open.
DEATH or SERIOUS INJURY can occur.
w w
e e
43