CYBEX gold ATON G SWIVE Mode D'emploi page 29

The ATON G SWIVEL has a Headrest that automatically adjusts the Harness height
without the need to undo and rethread the Harness. Using the seat's No Rethread
Harness, the Headrest may be adjusted up and down through 11 positions to fit your baby.
1. Unbuckle the Harness and Chest Clip, then
drape the Harness over the sides of the Infant
Car Seat Shell.
2. Place the child in the Infant Car Seat, making
sure their back and bottom are flush with the
Car Seat and the Buckle Strap is snug against
the child but NOT under the child's bottom.
3. Adjust for your baby by pulling up on the No
Rethread Harness Adjuster Handle A
sliding the Headrest up until the Harness
Slots are even with or slightly below your
child's shoulders.
IMPORTANT: For proper use of the Infant Car
Seat, the Harness Straps MUST be AT OR JUST BELOW your child's shoulders (see
pg. 9).
4. Buckle and snug Harness.
NOTE: Regularly check for proper Harness height as your child grows.
Product Features and Descriptions
No Rethread Harness
while
A
A A
29