Publicité
Les langues disponibles
Les langues disponibles
FITTING THE BATTERIES.-
This
monitor
uses
ALKALINE BATTERIES.
batteries, first remove the rear cover
on the monitor using a screwdriver
and then remove the cover of the
battery compartment, Fig. 1, and
carefully insert the two AA alkaline
batteries into the battery compartment
(A) making sure that the battery's
polarity
is
correct
battery's «+» terminal with the «+»
sign inside the battery compartment,
and the «-» terminal with the «-» sign).
Close the cover, as shown in Fig. 1.
If, after having switched the monitor on,
it displays errors or merely partial
segments then remove the batteries and
wait for about 15 seconds before
reinstalling them.
Weak batteries (run down) produce a
weak digital display (poor contrast) and
erroneous
readings.
immediately.
The monitor will turn on along with a
beep sound. The LCD will show all
segments for 2s and then display the
units (miles or kilometers) for about 1
second. Finally the display will go to
user setting mode.
The
monitor
will
automatically
if
motionless for 4 minutes.
Important. Discarded batteries must
be deposited in special containers,
Fig. 2.
FUNCIONES DEL MONITOR.-
SETTING USER DATA.-
The monitor will enter the user setting
mode after fitting the batteries or afetr
All manuals and user guides at all-guides.com
English
two
1.5
volt
To fit the
(matching
the
Change
them
switch
itself
the
unit
remains
pressing the RESET key for a few
seconds. Use the UP▲/DOWN▼ keys
to select the user - USER 1-USER 4
and press MODE to confirm.
The display will show SET GENDER to
set the sex. Use UP▲/DOWN▼ keys
to choose (MALE) or (FEMALE), press
MODE to confirm. The display will
show SET AGE. Use UP▲/DOWN▼
keys to enter the age (01-99), press
MODE to confirm. The display will
show
UP▲/DOWN▼ keys to enter the height
(100-200), press MODE to confirm.
Finally the display will show SET
WEIGHT, use UP▲/DOWN▼ keys to
enter enter the weight (20-150), press
MODE to confirm and you will go to
workout mode selection.
QUICK START PROGRAM.-
1. Press START to start working out
immediately. Time begin to count down
and the monitor will show (RPM) /
(TIME) / (WATT) / (HEART RATE) /
(SPEED) / (CALORIES) / (DISTANCE)
values.
The character animation only show
2.
the user.
3. Press STOP to stop workout. The
off
word STOP will be blinking. To resume
Program press START. To return to
workout mode selection press RESET.
WORKOUT
SELECTION.-
Use UP▲/DOWN▼ key to select
workout mode: Target time program
(TARGET TIME) / Target distance
program (TARGET DIST) / Target
calories program (TARGET CAL) /
Steady watt rate program (TARGET
8
SET
HEIGHT.
Use
MODE
Publicité
