Martin Yale papermonster F100 Instructions D'opération page 4

GB
IMPORTANT SAFETY NOTES
« The machine may not be operated
by more than one person at any
given time!
The machine was designed for safe
operation by "one person only".
The machine is not a toy, and is
«
not suitable for use by children!
The overall technical safety concept
of this machine (dimensions, feed
openings, emergency shutdown de-
vices etc.) does not provide for any
guarantee regarding hazard-free op-
eration by children.
Repairs may only be performed by
«
trained personnel!
OPERATION
1. Carefully unwind the wall power supply and
firmly insert the appropriate end into the con-
nector on the right side of the paperfolder.
2. Plug power supply into an appropriate outlet.
3. Insert up to three sheets of paper approxi-
mately 1 1/2" into the rear slot (labeled "IN").
Hold paper so that it lies squarely in the nip
(pinch point) of the rollers underneath.
There will be a brief time delay, then the fold-
er will automatically initiate the folding cycle.
Once the folding starts, the paper should be
released.
Figure 2
DESKTOP FOLDER
« Danger of injury! Keep all
loose articles of clothing,
ties, jewelery, long hair or
other loose objects away
from opening!
Danger of injury!
«
Never insert fingers into opening!
Danger of injury!
«
Do not spray and flammable liq-
uids or gases into the inlet open-
ing!
« In case of danger switch the ma-
chine off with the mains switch, or
with the emergency switch, or un-
plug the machine!
Always unplug the machine from
«
the mains power supply before
opening the machine!
OPERATION
- For accurate folds, hold your document at
the top center of the sheets, as shown in fig-
ure 2.
- Many users find that the folder functions best
when the paper is held very lightly allowing it
to square itself on the folding rollers.
4. Remove the folded paper from the front slot.
fold letter in
Figure 3
4
PAPER STOP ADJUSTMENT
Before beginning to fold, make sure the paper
stop (see Figure 1) is properly positioned for the
paper you are using.
When you view the bottom of the paper folder as
shown in Figure 1, the top pair of left and right
slots is for 8 1/2" x 11" paper.
The bottom pair of left and right slots is for
A4 paper.
If you need to change the position of the paper-
stop, remove it by gently flexing it in the middle
and with drawing one end first.
Then insert it into the other pair of slots by gen-
tly flexing the paper stop and inserting one end
first.
Dejamming handle
Paper stop
Figure 1
TIPS FOR BETTER OPERATION
1. Never put more than three sheets of paper
into the folder at one time.
2. Stapled pages may be used in the folder;
however, do not place sheets to be folded into
the folder with staples located at the fold po-
sitions (1/3 of the distance from the top and
bottom of the sheet).
Stapled end of paper must enter machine
first.
3. To fold for a window envelope, insert paper
with the top up and facing the operator (see
Figure 3, fold letter in).
To fold for a business letter (writing facing in),
insert paper top up and writing facing away
from operator (see Figure 3, fold letter out).
fold letter out
F100
INITIATION