Publicité
Les langues disponibles
Les langues disponibles
3. Open the Raymote mobile app and log in with your
user name and password. See Figure 69.
Figure 69. Log in the Raymote Mobile App
Preparing the Unit for Connection
1. Stand near the display of the Crosswind V unit. Press
the CONNECT key. See Figure 70.
Figure 70. CONNECT Key
2. The CONNECT menu displays the Wi-Fi State,
indicating "Ready to Config" wireless connection,
and also the HOTSPOT identifier. See Figure 71.
HPPH-XXXXX
Outside Lockout
Ready to Config
45 F
Figure 71. Wi-Fi Ready to Configure and HOTSPOT
3. At this point your unit is ready for connection.
NOTE: The following sections provide the instructions for
Android and iPhone devices.
44
Identifier
UNCONTROLLED DOCUMENT IF PRINTED
APPROVED
Add a New Heater to Raymote
1. In the Raymote app, press the menu button
located at the top left corner of the screen, then press
"+ Add new device". See Figure 72.
ADD THE FIRST UNIT
OR ADD MORE NEW UNITS
Figure 72. Add New Device
Publicité
