Raypak Crosswind V TWPH 4550 Manuel D'installation Et D'utilisation page 113

Diagramme du menu programmation
26
SCHEDULE Menu SCHEDULE Menu
UP key to Enter UP key to Enter
UP UP
MODE MODE
SCHEDULE Menu
Set Current Time*
Set Current Time Set Set Current Time Set Current Time Set Defaults Defaults
12:01 AM 12:01 AM 12:01 AM
Set Current Time Set Current Time
09:09 AM 09:09 AM
SERVICE SERVICE
Schedule Periods
Periods per Day Periods per Day
0 0
Periods 1 to 4 Setup
P1 Start time P1 Start time
8:00 AM 8:00 AM
SERVICE SERVICE
P1 End time P1 End time
5:00 PM 5:00 PM
P1 OperationMode P1 OperationMode
No Change No Change
P1 1-Speed Pump P1 1-Speed Pump
No Change No Change
P1 VS Pump Speed P1 VS Pump Speed
No Change No Change
P1 Auxiliary 1 P1 Auxiliary 1
No Change No Change
P1 Auxiliary 2 P1 Auxiliary 2
No Change No Change
Exemple : Chaque événement exécute un ensemble de
commandes définies par le utilisateur. Par exemple, si la
sortie de la pompe à vitesse unique doit être allumé à
8:00 AM et éteint à 2:00 PM: - Réglez « E1 start time » à
8:00 AM et « 1-Speed Pump » sur On. - Réglez « E2
start time » à 2:00 PM et « 1-Speed Pump » sur Off.
Figure 52. Menu Schedule (Programmation)
UNCONTROLLED DOCUMENT IF PRINTED
A PPROVED
Adjust Current Time:
UP UP
00:00 AM to 11:59 PM
DOWN DOWN
*This screen is not
displayed when unit is
connected to Wi-Fi
UP UP
Periods selection: 0 to 4.
DOWN DOWN
Set Start Time: 00:00 AM to
11:59 PM
Set End Time: 00:00 AM to
11:59 PM
Set Operation Mode: No Change,
Pool, Pool Cool*, Pool Auto* or Spa
Set Single Speed pump: no change
or On
Set Pump Speed setting: 1 to 4 for
Protégé pump and 4- Speed pumps
Set Return Valve position:
Position 1 or Position 2
Set Suction Valve position:
Position 1 or Position 2