Bertazzoni DW18S2IXV Manuel D'installation page 35

USE
WASH CYCLES FLOW CHART
RINSE & CRYSTAL &
HOLD CHINA
Prewash Prewash
Main Wash
×
113℉ (45℃)
× ×
× ×
Dry Hot
Rinse 140℉
×
(60℃)
× Drying
WASH OPTIONS
OPTION
Half Load Directs wash functions to the upper and
lower rack. Shortens the selected cycle
wash time and reduces energy and water
consumption.
Sanitize* Ensures maximum hygiene with increased
rinse water temperature to eliminate
bacteria up to 99.9%.
Increases wash time and water
Scrub
temperature to reach optimal washing
conditions and perfectly dissolve the
detergent.
Extra Dry Adds extra heating and drying steps to the
selected wash cycle to get perfectly dry
dishes. Increases the rinse water
temperature and extends the dry time.
Delay Delays the start of the selected wash cycle
by 1-19 hours at 1-hour increments.
* Sanitizes per NSF/ANSI standard 184 for residential
dishwashers.
NORMAL
REGULAR
PLUS
Prewash
Prewash
95℉ (35℃)
Main Wash Main Wash
131℉ (55℃) 140℉ (60℃)
Rinse Rinse
× ×
Dry Hot Dry Hot
Rinse 149℉ Rinse 149℉
(65℃) (65℃)
Drying Drying
DESCRIPTION
POTS &
QUICK
PANS
Prewash
×
113℉ (45℃)
Main Wash Main Wash
122℉ (50℃) 149℉ (65℃)
Rinse Rinse
× ×
Dry Hot
Dry Hot
Rinse 149℉
Rinse (68℃)
(65℃)
× Drying
Press and hold the "Options" button for 3 seconds until
the "Half Load" option LED indicator lights up on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Press the "Options" button until the "Sanitize" option
LED indicator lights up on the display. Press the "Start/
Pause" button and close the door within 4 seconds to
activate the option. At the end of a successful
sanitization, the corresponding indicator will light up. If
the washing cycle is interrupted or adequate water
heating cannot be achieved, the sanitizing LED may not
light.
Press the "Options" button until the "Scrub" option LED
indicator lights up on the display. Press the "Start/
Pause" button and close the door within 4 seconds to
activate the option.
Press the "Options" button until the "Extra Dry" option
LED indicator lights up on the display. Press the "Start/
Pause" button and close the door within 4 seconds to
activate the option.
Press the "Delay" button after selecting the wash cycle
and other optional functions. Delay Start cannot be set
after the program starts. The "Delay" button delays the
cycle start time by 1 hour. The display will show cycle
duration and programmed delay time alternately for 2
seconds. Continue to press "Delay" until you reach the
desired delay time. Press the "Start/Pause" button and
close the door within 4 seconds to activate the option.
To cancel the Delay Start function, open the dishwasher
door, press and hold the "Delay" button for 3 seconds.
SOAK &
WASH
Prewash Prewash
113℉ (45℃) 104℉ (40℃)
Main Wash Main Wash
149℉ (65℃) 149℉ (65℃)
Rinse Rinse
Intermediate
Intermediate
Rinse 140℉
Rinse
(60℃)
Dry Hot Dry Hot
Rinse 155℉ Rinse 155℉
(68℃) (68℃)
Drying Drying
ACTIVATION
AUTO
35