Publicité
Les langues disponibles
Les langues disponibles
USE
OPERATION
1) Display
2) On/Off + Start/Pause Button
3) Program Selection + Cancel Button
4) Delay Timer Button
5) Extra Options Button
6) Rinse-aid Indicator
•
i) Half Load Option Indicator
•
iii) Sanitize Option Indicator
•
iv) Scrub Option Indicator
•
v) Extra Dry Option Indicator
•
vi) Sanitized Indicator
WASH CYCLES
Turning the dishwasher on:
Hold the "On/Off" button for 3 seconds. If pressed once, the
button acts as a "Start/Pause" button.
Setting a wash cycle:
1) See the Wash Cycles table to determine a washing
program suitable for the dishes. Press the Program
selection button until the number of the selected cycle
appears on the display. Cycle time will appear on the
display alternated with cycle number.
2) Press Start/Pause and close the door within 4 seconds.
The cycle will start right after.
NOTE
To incorporate a cycle option to the wash
cycle, select the desired option button
before pressing Start. See Cycle Options.
The dishwasher will buzz if a program is not
compatible
Selection of the option will be canceled if
the Option button is pressed 6 times.
Changing a cycle:
To change the wash cycle when the dishwasher is running,
open the door and the dishwasher will switch to standby
mode. Select a new cycle, then press the Start/Pause
button. After closing the door within 4 seconds, the newly
selected cycle will resume the course of the old one.
Fig. 60
Canceling a cycle:
To cancel a program while the dishwasher is running, open
the door and press and hold the Program button for 3
seconds. "1" will show up on the display. The water
discharge process will start and will take 30 seconds to
complete.
Switching the dishwasher off:
"00" will appear on the display when the selected program
is complete. You can then switch your machine off using
the On/Off button. Disconnect the plug and turn off the
water tap.
NOTE
If the door of the machine is opened or the
power is cut off while a cycle is in
operation, the program will resume when
the door is closed or the power returns.
NOTE
If the power is cut off during the drying
process, the program will terminate. Your
machine will be ready for a new program
selection.
with
the
selected
option.
33
Publicité
