Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
MATERIALS THAT MAY BE REQUIRED
(Additional materials may be required to comply with local
codes)
Hot Water Supply Line - Minimum 3/
4" O.D. copper tubing or metal
braided dishwasher supply line.
UL listed conduit connector or strain
relief.
Teflon tape or other pipe thread
compound to seal plumbing
connections.
Shut-off valve and fittings appropriate
for hot water supply line (copper
tubing/compression fitting, or braided
hose).
Silicone
Glue
MATERIALS SUPPLIED
The parts required for positioning the dishwasher are in
plastic bags. Check that all of the following parts are
contained in plastic bags.
MANUAL BAG
The dishwasher comes with a manual bag containing: User
manual, Installation manual.
DISHWASHER PARTS BAG 1
This dishwasher bag comes with the following parts:
•
a. Test Strip(x1)(depending on model)
•
b. Hose Clamp(x1)
DISHWASHER PARTS BAG 2
•
c. Assembly plan(x1)
•
d. Steam Protection Foil(x1)
•
e. Wooden Door Fixing Strips(x2)
DISHWASHER PARTS BAG 3
•
f. Screws
•
g. Screws
•
h. Left Mounting Bracket(x1)
•
j. Right Mounting Bracket(x1)
•
k. Screws
DISHWASHER PARTS BAG 4 (DEPENDING ON MODEL)
•
l. Toe Kick Bracket(x2)
•
m. Screws
•
n. Plinth Fixing Metal(x4)
•
o. Adjustable Plinth(x1)
•
p. Adjustable Plinth Metal (130mm) depending on model
(x1)
•
r. Adjustable Plinth Metal (80mm) depending on model
(x1)
•
s. Plinth Locking(x2)
DISHWASHER PARTS BAG 5 (DEPENDING ON MODEL)
Fig. 9
•
t. Long Legs(x3)
5/32" x 53/32" ( 4mm x 42.5mm)(x6)
5/32" x 19/32" ( 4mm x 15mm)(x2)
5/32" x 27/32" ( 4mm x 21.5mm)(x2)
5/32" x 7/32" ( 4mm x 6mm)(x2)
Fig. 10
15
Publicité
